User Manual Bedienungsanleitung Manuel u°lisateur Manuale utente Manual del Usuario Manual do U°lizador Gebruiksaanwijzing Instrukcja obsługi Uživatelská příručka Používateľská príručka Korisnički priručnik Kasutusjuhend Uputsvo za rukovanje Navodila za uporabo Használa° útmutató Инструкции за употреба Manual de U°lizare Руководство пользователя Посібник користувача LED TV with DVB-T2/C/S2 SRT 24HX4003 SRT 32HX4003 SRT 40FX4003 SRT 49FX4003 SRT 55FX4003 SRT 65FX4003..
www.strong.tv 08 Jun 2017 17:26 Supplied by STRONG & Co, Japan Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna, Austria Email: [email protected]..
LICENSES THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM This product contains one or more programs protected under internat..
TABLE OF CONTENTS 1.0 INSTRUCTION 3 1.1 Safety Instructions 3 1.2 WEEE Directive 4 1.3 Storage 4 1.4 Accessories 4 1.5 Equipment set-up 4 2.0 INSTALLATION 5 2.1 Default PIN code: 0000 5 2.2 Front panel 5 2.3 Rear panel 5 2.4 Remote control 6 2.5 Installing the batteries 8 2.6 Using the remote control 8 3.0 FIRST TIME INSTALLATION 8 3.1 DVB-S installation 9 3.2 DVB-T installation 9 3.3 DVB-C installation 9 4.0 ELECTRONIC PROGRAMME GUIDE (EPG) 9 4.1 Info 10 4.2 Schedule 10 4.3 Remind 10 5.0 MENU SETTINGS 10 5.1 Menu control (DTV mode) 10 5.2 Picture menu 10 5.3 Sound menu 11 5.4 Channel 11 5...
1.0 INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. ± Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). ± Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus. ± To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. ± The ventilation should not be impeded by covering the ventilation openings..
1.2 WEEE Directive Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. 1.3 Storage Your device has been carefully checked and packed before ..
2.0 INSTALLATION 2.1 Default PIN code: 0000 2.2 Front panel Fig. 2 NOTE: The graphics are for representation only. 1. Power indicator /remote sensor 2. Standby button* 3. Speakers * except 24”: see chapter 2.3.1 2.3 Rear panel Fig. 3 NOTE: The graphics are for representation only. 2.3.1 24 inch 1. p Programme up button 2. q Programme down button 3. Opens the main menu. Press short to enter the main menu or press and hold to enter standby mode 4. ANTENNA ±AIR/CABLE/LNB² IN: Connect an antenna, cable, satellite dish to the TV for searching and receiving programmes. 5. HDMI1/HDMI2: Connect..
4. SERVICE ONLY: Service port. 5. CI+: Connect a Conditional Access Module (CAM). 6. USB 1: USB port. 7. : Headphone or Earphone audio output, speakers will be muted when earphone is plugged in and headphone selected. 2.3.3 40 inch 1. HDMI1 ±MHL²: Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console. HDMI1 port supports MHL function. 2. SERVICE ONLY: Service port. 3. SCART: Connect devices like DVD or VCR using SCART cable. 4. ANTENNA ±AIR/CABLE/LNB² IN: Connect an antenna, cable, satellite dish to the TV for searching and receiving programmes. 5. C..
3. PICTURE Change picture mode. 4. SOUND Change sound mode. 5. ZOOM Change aspect ratio. 6. SUBTITLE Enable/disable subtitles in DTV/USB mode. 7. EPG Press to display the current EPG information in DTV mode. 8. FAV Press to view your assigned favourite channels. Press p q to cycle through your assigned favourite channels, press ENTER to confirm. 9. 0~9 Choose channel directly. 10. CHN LIST Press to enter into the channel list. 11. RETURN Press to back to previous viewed channel. 12. MENU Open the menu options. 13. SOURCE Select the input source mode. 14. p qt u Navigate the menu. 15. ..
± MIX Press this button to superimpose the teletext over the TV programme. Press again to return to normal teletext mode. ± SUB³PAGE Press this button to enter or exit subpage mode (if subpage is available}. Press the RED or GREEN buttons to select a subpage.v ± INDEX Press this button to display index page. ± CANCEL Press this button to return to TV programme temporarily while searching for a Teletext page. When the search is done, the page number will be displayed on the upper left of the screen. Press again to return to the Teletext page. 2.5 Installing the batteries Fig. 5 Place 2x..
Then select the country. Use pqt u to select the Country of your preference. Confirm with ENTER on your remote control. The next screen appears with the tuner selection. Choose the one you like to use. Scan type Select which input source you want to use: DVB-S to receive satellite broadcasts (and if you are equipped with a satellite dish), DVB-T to receive terrestrial broadcasts or DVB-C to receive cable broadcasts. 3.1 DVB-S installation Satellite Setting Press p q to highlight the satellite your dish is aimed at. The signal quality bar on the bottom of the screen allows you to fine tune t..
4.0 ELECTRONIC PROGRAMME GUIDE (EPG) EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers information on broadcasted programmes. You can access it in digital mode by pressing EPG on the remote control. Press EPG to bring up the EPG interface. The second bar from the top will display the current date and time. On the list below, the channel you are currently watching will be highlighted. Before you can view any EPG information, you have to 'activate' every channel for which you want to view programme information. To do this, use pq to select..
MPEG NR Eliminates noise generated while creating digital picture signals. Available choices are Off, Low, Middle and High . In the User mode, settings can be changed for Brightness, Contrast, Colour, Tint and Sharpness . 5.3 Sound menu Sound Mode Select your favourite sound mode for each input. Choices are Standard, Music, Movie, Sports and User . Bass Adjusts the lower frequency of the sound. Treble Adjusts the higher frequency of the sound. Balance Control the sound balance between the right and left loudspeaker (earphone). Auto Volume Adjust the volume corresponding to the input audio l..
Highlight Satellite and press ENTER to access the satellite list and select one. Highlight LNB Type and press ENTER to select the LNB type. Make sure the 22KHz, DISEqC1.0/1.1 switch is corresponding to the selected satellite. After the above steps are finished, press the BLUE button to search for channels. 5.4.3 DTV Manual Tuning ±in DVB-T/C mode only² Search and store programmes manually. Select the source type DVB-T or DVB-C and search digital programmes manually. In the Channel menu, select DTV Manual Tuning and press ENTER to access. Press t u to select a Channel No. , and then press ..
Time Can setup Auto Sync, Clock, Time Zone, Summer Time, Sleep Timer and Auto Sleep . HDMI CEC Press to enter into submenus. HDMI CEC : Turn on or off HDMI CEC function. Auto Standby : Turn the TV to standby automatically. Device List : When HDMI CEC is ON , you can check the list of connected devices. Factory Reset Restore user setting to the default. SW Version Displays the current software version and the model name. Software Update (USB) Connect a USB device with upgrading software to upgrade the TV system. NOTE: 3 Audio Languages and Subtitle languages only work under DVB-S/DVB-C/ DVB-..
8. An "Unsupported File" message will be displayed if the file format is unsupported or the file is corrupted. 9. FHD big picture needs longer time to process, which is not caused by the TV. Please be patient. 10. This TV may not support some multimedia files changed and upgraded as the change of the encoding format or other technical aspects advances. 11. Please refer to chapter 9. Appendix for a list of supported file formats for USB playback. 6.2 USB menu Press SOURCE and select USB . You can view movie, music and photo files from your USB storage devices. Connect a USB storage device to..
Play & Pause/Stop/Previous/Next Press 1 / 2 to play or pause the playback. Press 3 to stop playing. Press 7 / 8 to play the previous or the next music file. Press t u to highlight the corresponding icon on the control bar, and then press ENTER . The TV will response accordingly. Fast Forward/Fast Reverse Press and hold 5 / 6 for seconds to draw the playing progress as you wish, then press 1 / 2 on the remote control to start playing from the new position. Repeat Highlight the icon and press ENTER . You can select 3 different modes: None to disable the function, 1 to repeat one track onl..
NOTE: The move function is only available when the image is enlarged. 7.0 TROUBLESHOOTING Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively you can send a support mail via our website www.strong.tv. Problem Possible cause and solution No picture,no sound 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure it is working or..
Problem Possible cause and solution No signal or weak signal, intermittent reception. 1. Cables might have loosened; moisture might have entered into cables or connectors, heavy rain at present or heavy storm at present. Check the cable connections, LNB and other equipment connected between the LNB and the receiver, or peak the dish. Wait for rain/storm to subside. Ask a local satellite specialist for advice. 2. The satellite dish is not pointing at the (correct) satellite(s). Adjust the dish. Ask a local satellite specialist for advice. 3. Satellite dish is too small, trees or buildings in..
2 x USB 1 x Headphones 1 x CI+ slot 1 x PC IN 1 x PC AUDIO IN 1 x AV IN 1 x Main power cable General Data Operating voltage: 100 ~ 240 V AC 50/60 Hz Power consumption: 24”: max. 40 W, typ. 25 W 32”: max. 65 W, typ. 35 W 40”: max. 74 W, typ. 55 W 49”: max. 120 W, typ. 90 W 55”: max. 150 W, typ. 99 W 65”: max. 190 W, typ. 154 W Power consumption in standby: 24”: <0.5 W 32”: 0.4 W 40”, 49”, 55”, 65”: 0.5 W Operating temperature: +5 °C ~ +35 °C Storage temperature: -15 °C ~ +45 °C Operating humidity: 20% ~ 80% RH, non-condensing Storage humidity: 10% ~ 90% RH, non..
Music File Type/±Ext Name² File Extension Version support Remark Mpeg-1 Layer 3 Wma, mp3 LPCM WMA 7-9.1 Ia WMA2 LPCM n/a (included in the video only) Photo File Type File Extension Version support Remark JPEG jpg/jpeg BMP bmp support all modes PNG png support interlace does not support animation mode 19 English English..